A Peace of Cate: A Dresser Makeover

While searching for an antique dresser to go with the laid-back style of our bedroom, I was disappointed at the selection. We went to every antique store, flea market and resale shop and could not find anything! After a while, I decided that I was going to just find a dresser and refinish it myself, but that search didn't go well either. So I opted for an experiment and was really glad that I did!

Below are the steps on how to make a "Weathered Wood Finish" or a "Faux Barnwood" look. This entire project was a blast, but there were a few things that really made it for me:

1) Incredibly inexpensive--total cost was under $60!
2) Really fun afternoon project--especially adding the dents and dings with the hammer and chain
3) Finding some unique door pulls to add your personal style

What you will need:

* Raw Wood Dresser (or any sanded wood piece--you could even make a table or bookcase!)
- I found mine at Ikea for $34.99
* White Wood Stain (Water-based works best because it dries quickly and is has almost no odor)
- I used MINWAX Water-Based Wood Stain in White Oak
* A Flat Gray Paint (any color or brand will do--pick a shade of gray that you like)
*Foam Brushes (2)
- You may also use a bristle brush, but foam works too
*Hammer, Metal Findings, etc. to rough it up a little bit

Step One: Staining the Wood
Make sure your stain is well-stirred before using. Stain the wood using a foam brush. Using your wood stainer apply a thick coat and let it dry. Do not wipe of any of the residue (sometimes the staining can will tell you to do so, but just leave it). This is the base coat for your wood so make sure you like the color of the stain that you chose.

Step Two: Adding the "Weathering"
After the staining has dried (usually about 10 minutes, if you are outside), dab the edge of a clean foam brush into the well-stirred flat gray paint. Brush it sparingly on the already stained wood. Let it dry. See video below.

Video:

Step Three: Rough it Up
This is where it really gets fun! Grab a hammer, some old biscuit cutters, a metal chain, etc. and rough up that wood! It'll soften it up and give it some character (especially if your wood is new). I like to hammer down the edges of the wood to give it a smoother finish--just an idea!